Le rouleau de porte de roulement de rouleau de machine de porte de volet formant la machine formant la machine de lamelle
Informations de base
Modèle: ZT-009
Description du produit
Le rouleau de porte de roulement de rouleau de machine de porte de volet formant la machine formant la machine de lamelle
La machine de fabrication de profilés de porte perforée perforée pour porte à persiennes perforée peut parfaitement finir les battants de porte de volet avec une haute qualité. la porte de volet perforée faisant la machine a perforé la porte de volet roulant formant la machine comprenant des pièces ci-dessous: Décoiler manuel, la puissance pressant, le nivellement, la machine principale formant le petit pain, la coupe hydraulique.
voici la porte de volet perforée faisant la machine le rouleau perforé de porte de volet formant des pièces de nivellement de machine. il a intenté un procès pour rendre la bobine d'acier plate.
cette machine est avec transmission par engrenages. et aussi la machine peut être avec la boîte de vitesses.
ci-dessous est les principales spécifications de la porte de volet:
Perforated Shutter door roll forming machine |
|||
Customer requirement:
Thickness: 0.8-1.0mm.
|
|||
Process for the whole production line: Decoiler---- perforation machine--- entry leveling---- roll forming machine---- shearing system--- run out table
|
|||
S/N |
Name |
Parameter |
Picture |
1 |
Decoiler |
Usage: It is used to support the steel coil and uncoil it in a turntable way. Passive uncoil pulled by roll forming system. a. Coil inner diameter: 450-550mm
b. Coil
max width: 300mm |
|
|
perforation machine
|
a.Material of mold: Gcr12MoV quenched b.Power: 3kw c.Punch speed:8m/min d.Thickness: 0.8-1.0mm It is a independent machine to punch the holes, you can remove this part when you customer doesn't need the holes. |
|
2 |
Entry leveling |
This part will level coil to make sure it is neat clean and straight. |
|
3 |
Roll forming machine |
a. Number of forming steps: 12 stations b. Shaft material: 45# steel with quenched treatment, precision machined, The diameter: ¢50mm c. Roller material: bearing steel with quenched treatment d. Transport: by gear e. Forming speed: 5-15m/min (it can be
adjusted by your demand) G. Voltage:380v, 50Hz,3 phase h. Structure:Memorial arch frame I. Size of machine:5.5m *0.8m *1.2m J. weight:4.6T |
|
4 |
Shearing system |
a.The material of blade: Cr12Mov, Hardening HRC 58-62℃ b.Length Tolerance:3m±1.0mm C. Power supply: Hydraulic station |
|
5 |
Hydraulic station |
a. Hydraulic motor Power:3kw b.Hydraulic oil: 46# c.Hydraulic pressure : 12Mpa
|
|
6 |
PLC station |
PLC control system, we will take Delta . You can set the cutting length in the PLC. |
|
7 |
Run out table |
It adopts welded steel and supported roller to transmit the products. |
|
8 |
Payment: 30% T/T in advance and balance 70% after inspection confirmation before shipment. Delivery time :30 days Container need: one 20` |
||
9 |
1. One year, and we will provide the technical support for the whole life. 2. Training: the buyer should charge of visa, return ticket, food and accommodation overseas and USD 80/person/day for salary. 3. Need one technician. 4. Training time: one week (contains the time of installation and adjustment) |
Groupes de Produits : Volet obturateur porte formant la Machine